# The Azimuth Project Blog - The stochastic resonance program (part 1) (Rev #57)

This page is a blog article in progress, written by David Tanzer. To see discussions of this article while it was being written, visit the Azimuth Forum. Please remember that blog articles need HTML, not Markdown.

guest post by David Tanzer</i>

At the Azimuth Code Project, we are aiming to produce educational software that is relevant to the Earth sciences and the study of climate. Our software takes the form of interactive web pages, which allow you to experiment with the parameters of a model and view its outputs. But in order to fully understand the meaning of a program, we need to know about the concepts and theories that inform it. So we will be writing articles to explain the science, the math, and the programming behind these models.

In this two-part series, I will cover the Azimuth stochastic resonance example program, by Allan Erskine and Glyn Adgie. Here I will outline some of the math and science behind the program, and next time dissect the program. By way of introduction, I am a software developer with research training in computer science, so this is a new field of investigation for me. Any amendments or clarifications are welcome!

### The concept of stochastic resonance

Stochastic resonance is a phenomenon in which, under certain conditions, a noise signal may amplify the effect of a weak signal. This concept was originally used in a hypothesis about the timing of ice-age cycles, but has since been applied to a wide range of phenomena, including neuronal detection mechanisms, and patterns of traffic congestion.

Suppose that we have a signal detector whose internal state is driven by an input signal. Also, suppose that the internal states are divided into “on” states and “off” states; this digital state is an abstraction from the concrete states. With a light switch, we could treat the force as the input signal, the angle as the concrete state, and the up/down classification of the angle as the digital state.

Let’s consider the effect of a periodic input signal on the digital state. Suppose that the wave amplitude is not big enough to change the digital state, yet large enough to drive the detector’s concrete state close to the digital state boundary. Then, a bit of random noise, occurring near the peak of an input cycle, may “tap” over the system over to the other digital state. So there will be a phase-dependent probability of transitions between digital states. In this relationship, which is catalyzed by the noise, we see the input frequency is being “stochastically transmitted” through to the output. The noise has amplified the input signal.

Stochastic resonance has been found in the signal detection mechanisms of neurons. There are, for example, cells in the tails of crayfish which are tuned to low-frequency signals in the movement of the water, generated by the motions of predators. These signals alone do not reach the firing threshold for the neurons, but with the right amount of noise, the neurons do respond to the signal.

Stochastic resonance, Azimuth Library

### Bistable stochastic resonance

Stochastic resonance was originally defined for the special case of a bistable system – where each digital state is the basin of attraction for a stable point of equilibrium.

The first application of stochastic resonance was to a hypothesis concerning the cycling of the ice-ages within the framework of bistable climate dynamics. Although this hypothesis has not been confirmed, it remains of interest (1) historically, (2) because the the timing of the ice-age cycles remains an open problem, and (3) because the Milankovitch theory upon which it rests is an active part of the current scientific attempts to explain the timing of the ice ages.

In the bistable model, the two climate states are a cold, “snowball” Earth and a hot, iceless Earth. The snowball Earth is stable because it is white, and hence reflects solar energy, which keeps it frozen. The iceless Earth is stable because it is dark, and hence absorbs solar energy, which keeps it melted.

The Milankovitch hypothesis states that the drivers behind climate state change are the long-duration cycles in the solar energy received in the northern latitudes, which in turn are caused by periodic changes in the Earth’s orbital parameters. The significance of the north is that the glaciers are concentrated there, and so a sufficient “pulse” in the northern temperatures could trigger a state change.

Three such astronomical cycles have been identified:

• Changing of the eccentricity of the Earth’s elliptical orbit, with a period of 100 thousand years

• Changing of the obliquity (tilt) of the Earth’s axis, with a period of 41 thousand years

• Precession (swiveling) of the Earth’s axis, with a period of 23 thousand years

In the stochastic resonance hypothesis, the Milankovitch signal is amplified by random events to produce changes in the state of the climate. More recent forms of Milankovitch theories invoke a deterministic forcing mechanism. In a theory by Didier Paillard, the climate is modeled as having three states, called interglacial, mild glacial and full glacial, and the state changes depend on the volume of ice as well as the energy received in the north (called the insolation).

Milankovitch cycle, Azimuth Library

• John Baez, Mathematics of the environment (part 10). This presents an exposition of Paillard’s theory.

### A mathematical model of stochastic resonance

The Azimuth demo program defines the behavior of the output signal through a stochastic differential equation (SDE), which specifies the derivative as a function of time, the current signal value, and a random noise process.

The program’s SDE sets the deterministic component of the derivative to a bistable function of the current signal value plus a sine function of time:

DerivDeterministic(t, x) = SineWave(t, amplitude, frequency) + Bistable(x),

where Bistable(x) = x (1 - x2).

Alone, the sine wave would cause the output signal to vary sinusoidally.

Now let’s analyze the bistable polynomial, which has roots at -1, 0 and 1. The root at 0 is an unstable equilibrium, and -1 and 1 are points of stable equilibrium. The basin of attraction for -1 is all the negative numbers, the basin for 1 is the positive numbers, and the basins are naturally separated by the unstable equilibrium.

We will treat each basin as one of the digital states of a bistable system.

Now let’s put the sine wave and the bistable polynomial together. If the wave is weak, the system will gravitate towards one of the attractors, and then continue to oscillate around it thereafter – never leaving the basin. But if the wave is large, it will cause the system to oscillate between the two basins.

Now let’s include the noise. Suppose the sine wave was large enough at its peaks to pull the system close to zero, but not enough to cross it over. Then a noise event occurring near the peak of the sine wave could push the system over to the other side. Stochastic resonance will occur.

### Recap

We’ve talked about the idea of stochastic resonance, touched on some of its applications, and described the mathematical model of stochastic resonance used in the Azimuth demo program. Next time we will look into this program: how to use it, how it works, and how to modify it to develop new programs.

category: blog